Previous
CERT warns of key ISC vulnerability
News DHCP software is used to assign IP address information to computers on a network as they require it. For example, when a user selects "Obtain an IP address automatically" in their Windows networking settings, it's a DHCP server attached to the...
[January 16, 2003, 8:48]
Linux on IBM eServer zSeries and S/390: TCP/IP Broadcast on z/VM Guest LAN
White Papers Using IP broadcast support, Linux guests can for the first time use DHCP to lease an IP address dynamically from a DHCP server in a z/VM Guest LAN environment. This frees the administrator from the previous method of having to hardcode an IP...
[September 28, 2004, 3:00]
Static IP conundrum
News Further, if DHCP could then use this static IP address table or database, it could resolve not to hand out those addresses to other clients. As for logging the requests as frankl_27 wanted to do, Moore said that the DHCP logs would contain...
[October 1, 2002, 11:54]
Consider remote access and IP address management in your Active Directory network design
White Papers Then, study IP address management and the use of DHCP, including how IP addresses and subnets should be mapped to DHCP scopes (and/or superscopes), which are then used to assign IP address and configuration data to clients on the associated subnet.
[March 24, 2009, 14:27]
Install and configure a DHCP server in Windows Server 2008 review
Reviews By adding a reservation, you ensure that a machine always receives the same IP address from the DHCP server. Microsoft Windows Server 2008’s built-in DHCP server allows Windows machines (and any other TCP/IP-based machines and devices) to obtain...
[May 19, 2008, 10:39]
Troubleshoot Windows 2000 DHCP server
News Then check the status of the DHCP Server Service and the IP address leases themselves. If you get an address in the range 169.254.x.x on a Windows 2000 client, you'll know that the client was unable to obtain an IP address from the DHCP server.Try...
[January 21, 2003, 10:01]
Top Windows 2000 networking tips
News Windows 2000 introduced a feature called Dynamic DNS (DDNS), which enables a Windows 2000 client to request that a Windows 2000 DHCP server update the client's host record when the host name or the client IP address changes.
[October 15, 2002, 10:59]
Excellent kit, awful instructions
Member Review The Web-based interface is good -- but the field descriptions are confusing: I fell into the trap of enabling DHCP (so that the existing DHCP server on the network would give the KLG-575 an appropriate IP address) but ended up allowing the KLG-575...
[June 14, 2004, 13:02]
Actiontec Wireless-Ready Multimedia Home Gateway review
Reviews Configure all your PCs -- wired or wireless -- to use DHCP to get their IP address and connect them to the Gateway. You use your Web browser to configure the gateway, which is why it's important to use the built-in DHCP server -- you can't change...
[February 27, 2002, 23:00]
Google Mini Search Appliance review
Reviews However, you will need to give the Mini a static IP address (provided by your network admin) and a SMTP server address, which isn't delivered via DHCP. The Google Mini can obtain some of the needed configuration info from your network's DHCP server.
[August 8, 2005, 8:55]
Tune up your VPN network connections
News Note that if you place the DHCP server on a remote network, the server should have a NIC installed with an IP address for each network ID for which it has scopes. However, the server must be physically, instead of logically, multihomed because the...
[May 16, 2002, 21:22]
Installing network protocols in Windows XP
News If the system is to receive an IP address automatically from a DHCP server, you can simply close the Local Area Connection Properties box and reboot your system. The DHCP server will snag that message off the network and fire back an IP address and...
[April 25, 2002, 13:05]
Netgear ProSafe DGFV338 review
Reviews Mode of operations comprise one-to-one/many-to-one Multi-Network Address Translation (NAT), classical routing and unrestricted users per port, while IP Address Assignment includes Static IP Address Assignment, DHCP Replay, and DHCP Address...
[June 14, 2007, 15:03]
Solve Windows 2000 DNS server problems
News Running these two commands back to back will renew the IP address lease and refresh the workstation's DHCP options. If you're running DHCP, try running IPCONFIG /RELEASE followed by IPCONFIG /RENEW. Even though you can do that simply by opening a...
[May 19, 2003, 13:03]
ProCurve Switch 2610-24-PWR review
Reviews However, by default the switch will acquire an IP address from a DHCP server, so most network administrators would probably setup the switch using a LAN connection. For example, in our Lab tests we made a telnet connection to the switch using a...
[May 14, 2008, 16:08]
Buffalo AirStation WBR-G54 review
Reviews If you're using a wireless client to do this, there's a utility that lets you set the unit's IP address, or simply discover it if you're using the DHCP server. In addition to the DHCP server, a network address translator (NAT), firewall and...
[January 24, 2003, 17:04]
Provisioning Server Enhancement 2
White Papers Existing IP address provisioning DHCP servers geared for enterprise networking currently offer only minimum functionality need by operators of a Multiple Subscriber Organizations (MSO) cable modem systems.This document second in a series of...
[September 23, 2003, 6:45]
IP Sender
Downloads A simple application that gets the current DHCP public and private IP address of your computer. IP Sender compares your previous addresses then sends a mail message to the desired recipient. IP Sender requires an internet connection and the Mail...
[March 21, 2006, 6:00]
IP Manager WLAN
Downloads Choose between DHCP or a list of static addresses. Change your IP address, Subnet Mask, Default Gateway, DNS, WINS, WEP, SSID, and your proxy settings used for Internet Explorer. For the user that switches networks on a regular basis, IP Manager...
[March 22, 2003, 5:40]
IP Manager
Downloads Choose between DHCP or a list of static addresses. For the user that switches networks on a regular basis, IP Manager lets you change your IP address at startup. Create a partnership and IP Manager always retains this for future use.
[May 24, 2001, 6:54]
